Magic Mobility Frontier Uživatelský manuál stáhnout pdf (Strana 15)

Page 15

Figure 4 The wheelchair anchored pelvic belt

The wheelchair is not provided with a wheelchair anchored belt restraint as standard.

It must be requested at the time of ordering the wheelchair or it can be retrofitted

later on by a Magic Mobility Representative. The Magic Mobility supplied wheelchair

anchored restraint system conforms with WC19 and ISO7176-19 including section

4.9.2 through 4.9.5 and 5.2, and it has been used in the dynamic test of Annex A for

compliance with 5.3.

The pelvic belt should be worn low across the pelvis so that the angle of the pelvic

belt is within the preferred zone of 45° to 75° to the horizontal. Belt restraints should

not be held away from the body by the wheelchair components or parts, such as the

wheelchair armrests or wheels, see figures 5 and 6. Upper torso belts should fit over

the shoulders.

Figure 5 Correct positioning of belt

Shoulder belt connection pin

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

Žádné komentáře

Magic Mobility Frontier Uživatelský manuál Strana 15